Skip to content
Phone Guides

Plan an RTP port range before changing media rules

Record the PBX or SBC media range, expected concurrent calls, firewall direction and provider’s documented range. Account for separate call legs and any services sharing ports.

An RTP port range before changing media rules

  1. Save the current rules and identify whether NAT rewrites media addresses. Choose one inbound and one outbound call to test after the range change.
  2. Use a narrow rule tied to documented sources where possible. Do not assume that opening the SIP port also opens the negotiated RTP path.

Rollback is warranted if setup succeeds but two-way audio or hold fails on the pilot path.

Check the wider path

Confirm how many media legs a single call can create through the PBX or SBC. Transfers, recording or conferencing may use additional allocations. Treat the range estimate as a capacity plan to test, not a universal ports-per-call formula.

Use the RTP port ranges and media planning for VoIP to confirm terms and settings before the change.