Skip to content
Phone Guides

Review DTMF compatibility on common call paths

Sample a voicemail menu, an internal IVR and an external IVR that the organisation is permitted to test. Record the endpoint type, codec and DTMF method negotiated.

DTMF compatibility on common call paths

  1. Look for changed trunk or SBC profiles, especially after carrier migration or transcoding changes. A path that accepts one digit may still mishandle repeated or long digits.
  2. Keep a short, safe test sequence with the route owner and avoid real customer transactions during checks.

Track failed paths by endpoint and provider leg so a local setting is not changed for an upstream fault.

Carry the result forward

Include at least one path with transcoding if the service uses it. A method that works on a local IVR may fail on a carrier leg. Record the approved test destination and expected response so the same check can be repeated safely.

See the DTMF guide: how phone keypad tones work in VoIP when updating the service record.