Skip to content
Phone Guides

Separate congestion from other call-quality faults

Collect a timed measurement from the affected endpoint or site while calls are poor. Record link utilisation, queue drops and the marking observed at the congestion point.

Separate congestion from other call-quality faults

  1. Compare with the same path when quality is acceptable. Packet loss before the WAN edge, on the provider leg and on Wi-Fi call for different actions.
  2. Keep the codec and packet interval in the test record. A subjective report of choppy audio cannot identify the dropping device by itself.

Use a controlled call to confirm whether the proposed queue or capacity change improved both directions.

Keep the comparison precise

Mark the direction in which each symptom was heard. A caller hearing broken audio may indicate loss on the stream coming toward that caller, which can be a different queue from the one carrying their own voice. Compare measurements on both sides.

Use the VoIP QoS: latency, jitter, packet loss, and capacity to interpret the recorded messages and settings.