Check a SIP trunk handover before cutover
Record the provider’s trunk address, authentication method, permitted source addresses and supported transports. Confirm the number format and the DIDs that should arrive on the trunk.
A SIP trunk handover before cutover
- Save the existing inbound and outbound routes, caller-ID rules and carrier contacts. Set a cutover window, test numbers and the person authorised to roll back.
- Test outgoing, incoming, hold, transfer and two-way audio on a pilot route. Follow the provider’s approved method for emergency-call testing.
A registered trunk is not proof that incoming calls or media work; each call direction needs its own result.
Check the wider path
Put the provider handoff in the test record: transport, authentication, approved source addresses and number format. If the carrier requires a port or caller-ID change, confirm it in writing before cutover. Keep emergency routing outside a casual pilot.
Use the SIP trunking fundamentals: how business calls reach the carrier to confirm terms and settings before the change.